Oli Vibrators India Private Limited
Oli Vibrators India Private Limited
Peenya, Bengaluru, Karnataka
GST No. 29AACCO1667Q1ZQ
Send E-mail
Call 0804886214283% Response Rate

Concrete Consolidation


Our range of products include cmt 35 frequency and voltage converters, cm-frequency and voltage converters, cmm 25 oli frequency and voltage converter, ewo - high frequency internal vibrators with built-in converter, vhp electric high frequency internal needle vibrator and vhn electric high frequency internal vibrators.

Ask for Price

Price on Request: Get Latest Price

Product Brochure
Product Details:
ModelCMT 35
Input Voltage400V 3ph 50Hz
Output Voltage42V +/- 10% 3ph 200Hz
FrameWheeled
Supply Electric Cable5.0 m
Output Power2.6 kVA
Output Current36 A
Input Current6 A
Input Power3.3 kW

CMT 35 Frequency and Voltage Converters equipped with permanent magnets, specifically designed to power high frequency concrete vibrators continuously.
On construction sites, during the consolidation of the concrete, a light, flexible and easy-to-use tool is often required, which can be connected directly to the common, single-phase power lines (230 or 110 Volt, 50/60 Hz).

In order to solve this necessity, the EWO range has been developed: high-frequency immersion vibrators equipped with an integrated electronic frequency converter capable of transforming the single-phase input voltage (230V or 110V, 50/60 Hz) into the three-phase voltage (230 V, 200 Hz) necessary to obtain 12,000 vpm. Compared to the common vibrating needles powered by electromechanical converters, the EWO has several advantages:

  • They are light and flexible;
  • The constant output frequency maintains the maximum centrifugal force and thus a high and consistent performance;
  • There is protection against short circuits, excessive temperature, voltage and currentabove or below the nominal values.

 

Other Details:

COMPATIBILITY TABLE (maximum number of vibrators that can be connected)
CMM 15 1x VHN 38 1x VHN 50 1x VHN 59


CMM 25 2x VHN 38 2x VHN 50 2x VHN 59 4x VHN 59 1x VHP 59 1x VHP 65
CMT 25 2x VHN 38 2x VHN 50 2x VHN 59 1x VHP 50 1x VHP 59 1x VHP 65
CMT 35 3x VHN 38 3x VHN 50 3x VHN 59 2x VHP 50 2x VHP 59 1x VHP 65
CMT 55 3x VHN 38 3x VHN 50 3x VHN 59 3x VHP 50 3x VHP 59 2x VHP 65
CMT 85 4x VHN 38 4x VHN 50 4x VHN 59 4x VHP 50 4x VHP 59 3x VHP 65

Yes! I am Interested


Ask for Price

Price on Request: Get Latest Price

Product Brochure
Product Details:
Input Voltage400V
Output Voltage42V +/- 10% 3ph 200Hz
PhaseThree Phase
Weight50-56 kg
Duty CycleContinuous S1
BrandOli
ProtectionOverload protection
Working Temperature-20 Deg C to +40 Deg C
Supply CableNeoprene electric cable HO7RN-F with plug
Frame TypeWheeled
Supply Electric Cable5.0 m
Input Current9-12 A
Input Power5.0-6.6 kW
Frequency50 Hz

CM-Frequency and Voltage Converters consist of an electric motor coupled to a permanent magnet generator that reduces the single-phase (230 V, 1 ph) or three-phase (400 V, 3 ph) input voltage into one lower than 50 V increasing the frequency to 200 Hz, necessary for correct operation of electric internal vibrators, thus ensuring operator safety as occurs with low voltage equipment.
Converters are suitable for continuous duty.
With multi-socket models a maximum of four multiple high frequency concrete vibrators can be connected simultaneously, as long as total power consumption does not exceed the rated current of the converter.
To facilitate the manoeuverability, depending on the model, a handle or a grip frame with coupling or wheels is provided.

CM-type Frequency and Voltage Converters are equipped with permanent magnets and are specifically designed to continuously power high frequency concrete vibrators.
A new design, high quality materials and innovative solutions ensure high reliability of this converter range, as well as total absence of maintenance.


Description:

Frequency and Voltage Converters consist of an electric motor coupled to a permanent magnet generator that reduces the single-phase (230 V, 1 ph) or three-phase (400 V, 3 ph) input voltage into one lower than 50 V increasing the frequency to 200 Hz, necessary for correct operation of electric internal vibrators, thus ensuring operator safety as occurs with low voltage equipment.
Converters are suitable for continuous duty.
With multi-socket models a maximum of four multiple high frequency concrete vibrators can be connected simultaneously, as long as total power consumption does not exceed the rated current of the converter.
To facilitate the manoeuverability, depending on the model, a handle or a grip frame with coupling or wheels is provided.


Function:

Suitable for continuously powering high frequency internal or external vibrators.


Features:
  • Available in 230 V, 50 Hz, single phase (two models) or 400 V, 50 Hz, three phases (four models)
  • 1 ~ 4 outputs for connecting high frequency poker vibrators
  • Output power: 1 ~ 6.2 kVA
  • Insulation class F
  • IP 44 protection
  • Overload protection
  • Ambient temperature: -20 ~ 40 °C (-4 ~ 104 °F)
  • Smooth, robust aluminium casing
  • Forced ventilation

Benefits:
  • No overheating
  • Optimum cooling
  • Easy cleaning
  • Maintenance-free

 

pplications:
  • Concrete Compaction

Sectors:
  • Building & Construction

    Yes! I am Interested


    Ask for Price

    Price on Request: Get Latest Price

    Product Details:
    ModelCMM 25,CMT 25
    Input Voltage230 - 400V
    Output Voltage42V +/- 10%
    PhaseThree Phase
    Weight Kg34
    Supply Electric Cable3.5 m
    Output Power1.8 kVA
    BrandOli

    CMM 25 Oli Frequency and Voltage Converter equipped with permanent magnets, specifically designed to power high frequency concrete vibrators continuously.
    On construction sites, during the consolidation of the concrete, a light, flexible and easy-to-use tool is often required, which can be connected directly to the common, single-phase power lines (230 or 110 Volt, 50/60 Hz).

    In order to solve this necessity, the EWO range has been developed: high-frequency immersion vibrators equipped with an integrated electronic frequency converter capable of transforming the single-phase input voltage (230V or 110V, 50/60 Hz) into the three-phase voltage (230 V, 200 Hz) necessary to obtain 12,000 vpm. Compared to the common vibrating needles powered by electromechanical converters, the EWO has several advantages:

    • They are light and flexible;
    • The constant output frequency maintains the maximum centrifugal force and thus a high and consistent performance;
    • There is protection against short circuits, excessive temperature, voltage and currentabove or below the nominal values.

     

    Other Details:

    COMPATIBILITY TABLE (maximum number of vibrators that can be connected)
    CMM 15 1x VHN 38 1x VHN 50 1x VHN 59


    CMM 25 2x VHN 38 2x VHN 50 2x VHN 59 4x VHN 59 1x VHP 59 1x VHP 65
    CMT 25 2x VHN 38 2x VHN 50 2x VHN 59 1x VHP 50 1x VHP 59 1x VHP 65
    CMT 35 3x VHN 38 3x VHN 50 3x VHN 59 2x VHP 50 2x VHP 59 1x VHP 65
    CMT 55 3x VHN 38 3x VHN 50 3x VHN 59 3x VHP 50 3x VHP 59 2x VHP 65
    CMT 85 4x VHN 38 4x VHN 50 4x VHN 59 4x VHP 50 4x VHP 59 3x VHP 65

    Yes! I am Interested


    Ask for Price

    Price on Request: Get Latest Price

    Product Brochure
    Product Details:
    Input Voltage230V +10% -15%
    Input Frequency50/60Hz +/- 5%
    Input Amperage5.5 A
    ModelEWO 50C, EWO 59C, EWO 65C
    Head Diameter38,50,59 mm
    Head Length2.4, 5.2, 8.2 kg
    Total Weight14.5, 20.0 22.8 kg
    BrandOli

    Ewo - High Frequency Internal Vibrators With Built-In Converter, which are directly connected with the mains supply at 230 V, 50/60 Hz, consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
    The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
    Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.

    A small electronic converter, complete with switch, is integrated into the power cable.
    The inverter is housed in a sturdy, dust-tight, waterproof (IP 66) aluminium casing. It is protected against overload, overvoltage, excess temperature and short circuits.
    A led signals with different colours accurate functioning or the presence of a fault. Each colour corresponds to a specific fault.
    All electronic components are covered with a resin so as to protect them from vibration, humidity and any shock.

    EWO Electric High Frequency Concrete Vibrators are equipped with a small electronic frequency converter integrated into the power cable, suitable for connection to a single phase mains socket.
    This line of vibrators is characterised by high centrifugal force, constant speed and increased wear resistance which makes it suitable even for the most consistent types of concrete and for continuous use.
    The shaft is supported by four bearings for extra heavy-duty work requirements.


    Details:

    EWO Electric High Frequency Internal Vibrators, which are directly connected with the mains supply at 230 V, 50/60 Hz, consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
    The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
    Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.

    A small electronic converter, complete with switch, is integrated into the power cable.
    The inverter is housed in a sturdy, dust-tight, waterproof (IP 66) aluminium casing. It is protected against overload, overvoltage, excess temperature and short circuits.
    A led signals with different colours accurate functioning or the presence of a fault. Each colour corresponds to a specific fault.
    All electronic components are covered with a resin so as to protect them from vibration, humidity and any shock.


    Function:

    Highly increased compacting capacity enables quick removal of air bubbles without any segregation of the elements composing the mass. The result is mechanically strong, durable and homogeneous concrete strength. The comprehensive range satisfies the requirements of both private and civil engineering sector.


    Features:
    • Head diameter: 38 ~ 65 mm (1.5 ~ 2.5 in)
    • Amplitude: 1.2 ~ 3 mm (0.04 ~ 0.1 in)
    • Efficiency diameter: 45 ~ 110 mm (1.7 ~ 4.3 in)
    • Nominal frequency: 12,000 vib/min
    • Centrifugal force: 1,700 N ~ 7,330 N
    • Ergonomic casing
    • Lightweight (3 kg)
    • Tropicalised electronic panel
    • Ambient temperature: -20 ~ 40 °C (-4 ~ 104 °F)
    • Thermal protection
    • Exclusive sealing system
    • Hardening treatment for EWO38C; chrome plating for EWO50C, EWO59C, EWO65C
    • Vibration needle head protection class IP68

    Benefits:
    • Reliable
    • Safe
    • Easy to handle
    • No overheating
    • Easy maintenance

     

    Applications:
    • Concrete Compaction

    Sectors:
    • Building & Construction

    Yes! I am Interested


    Ask for Price

    Price on Request: Get Latest Price

    Product Brochure
    Product Details:
    BrandOli
    Voltage420 V
    IP RatingIP66
    Frequency50 - 200 Hz
    Phase3
    Working Temperature-20 Deg C to +40 Deg C

    VHP Electric High Frequency Internal Needle Vibrator consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
    The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
    Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.

    VHP are Electric High Frequency Internal Vibrators for concrete compaction.
    The VHP range (professional line) develops high centrifugal forces. The shaft is supported by four bearings for extra heavy-duty work requirements.
    The VHP range is characterised by high centrifugal force, constant speed and high wear resistance which makes it suitable for all types of concrete processing, even in continuous operation.


    Description:

    VHP Electric High Frequency Internal Vibrators (professional range) consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
    The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
    Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.


    Function:

    Highly increased compacting capacity enables quick removal of air bubbles without any segregation of the elements composing the mass. The result is mechanically strong, durable and homogeneous concrete strength with no cracks or cavities.


    Features:
    • Head Diameter: 50 ~ 65 mm (2.0 ~ 2.5 in)
    • Amplitude: 1.2 ~ 3 mm (0.04 ~ 0.1 in)
    • Nominal frequency: 12,000 vib/min
    • Centrifugal force: 3,760 N ~ 7,330 N
    • Ambient temperature: -20 ~ 40 °C (-4 ~ 104 °F)
    • Thermal protection
    • Exclusive sealing system
    • Needle chrome-plated
    • Vibration needle head protection class: IP 68
    • Community Directives and subsequent modifications: 2006/42/CE, 2004/108/CE, 2006/95/CE; conformity verified according to standard documents: CEI EN 60745-1

    Benefits:
    • No overheating
    • Durable vibrator head
    • Waterproof
    • Easy maintenance
    • High reliability

    Options:
    • Cast aluminium ON/OFF switch casing
    • Rubber tip

    Applications:
    • Concrete Compaction

    Sectors:
    • Building & Construction

      Yes! I am Interested


      Ask for Price

      Price on Request: Get Latest Price

      Product Brochure
      Product Details:
      ModelEWO 38C
      BrandOli
      Input Voltage115V +10% -15%
      Input Frequency50/60Hz +/- 5%
      Head Diameter38 mm
      Head Length404 mm
      Head Weight2.4 Kg

      VHN Electric High Frequency Internal Vibrators (standard range) consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
      The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
      Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.

      VHN are Electric High Frequency Internal Vibrators for concrete compaction.
      The VHN range is characterised by high centrifugal force, constant speed and high wear resistance which makes it suitable for all types of concrete processing, even in continuous operation.


      Details:

      VHN Electric High Frequency Internal Vibrators (standard range) consist of a tractor unit called vibrator head, 10 metres of electric cable and of 5 metres internally reinforced operating hose.
      The high centrifugal force is generated by a high frequency electric motor integrated in the vibrator head.
      Vibrators are equipped with a key pad (IP 66 protection) in polyamide, complete with switch protected by a reinforced gasket resistant to continuous use and wear.


      Function:

      Highly increased compacting capacity enables quick removal of air bubbles without any segregation of the elements composing the mass. The result is mechanically strong, durable and homogeneous concrete strength with no cracks or cavities.


      Features:
      • Head Diameter: 38 ~ 59 mm (1.5 ~ 2.3 in)
      • Amplitude: 1.2 ~ 3 mm (0.04 ~ 0.1 in)
      • Nominal frequency: 12,000 vib/min
      • Centrifugal force: 1,700 N ~ 4,560 N
      • Ambient temperature: -20 ~ 40 °C (-4 ~ 104 °F)
      • Thermal protection
      • Exclusive sealing system
      • Needle hardening treatment
      • Vibration needle head protection class: IP 68
      • Community Directives and subsequent modifications: 2006/42/CE, 2004/108/CE, 2006/95/CE; conformity verified according to standard documents: CEI EN 60745-1

      Benefits:
      • No overheating
      • Durable vibrator head
      • Waterproof
      • Easy maintenance
      • High reliability

      Options:
      • Cast aluminium ON/OFF switch casing
      • Rubber tip

       

      Applications:
      • Concrete Compaction

      Sectors:
      • Building & Construction

      Yes! I am Interested


      REQUEST CALLBACK
      Ask for Price

      Price on Request: Get Latest Price

      Product Details:
      Brand/MakeOLI
      Power420 V
      Frequency50- 200 Hz
      Phase3
      IP RatingIP66
      Working Temperature-20 Deg C to +40 Deg C

      We deal in high quality of products which are available on customer demand at affordable prices

      Yes! I am Interested


       



      Electronic Frequency Converter



      Corporate Brochure




       

       

      Send SMS
      Ashish Srivastava  (Marketing Manager)
      Oli Vibrators India Private Limited
      84/85, 7th Main, Peenya Industrial Area
      Bengaluru - 560058 , Karnataka , India
      Send E-mail
      Share Us:
      X