Send E-mail
Call 0804886214281% Response Rate
Oli Vibrators India Private Limited
Oli Vibrators India Private Limited
Peenya, Bengaluru, Karnataka
GST No. 29AACCO1667Q1ZQ
Send E-mail
Call 0804886214281% Response Rate
Our Products

2 Poles - 3000/3600 RPM MVE Standard RangeYes! I am interested
Function

MVE External Electric Motovibrators can be used as flow aids, on hoppers or silos to improve material discharge, or as drives on vibrating machines for several purposes such as conveying, screening, sizing, or compacting in a variety of industries.
When the MVE is switched on a sinusoidal centrifugal force is provided by rotation of the eccentric weights. With only one MVE fitted on a vibrating machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.

Features
PJ - Air Jet - Combined Hammer BlastsYes! I am interested
The PJ-type PICJET® Combined Hammer Blast adds to the mechanical action of the PS-type MARTSHOCK Hammer (see relevant page) a compressed air jet expanding across the surrounding wall surface, as well as in the stored material. It also adds more extended impact vibration. The PICJET® Hammer Blast is most suitable materials with a tendency to bridge or rathole those with hygroscopic properties.

PICJET PJ Combined Hammer Blasters perform a double action on the bulk material or :

CMT 35 Frequency and Voltage ConvertersYes! I am interested
CMT 35 Frequency and Voltage Converters equipped with permanent magnets, specifically designed to power high frequency concrete vibrators continuously.
On construction sites, during the consolidation of the concrete, a light, flexible and easy-to-use tool is often required, which can be connected directly to the common, single-phase power lines (230 or 110 Volt, 50/60 Hz).

In order to solve this necessity, the EWO range has been developed: high-frequency immersion vibrators equipped with an integrated electronic frequency converter capable of transforming the single-phase input voltage (230V or 110V, 50/60 Hz) into the three-phase voltage (230 V, 200 Hz) necessary to obtain 12,000 vpm. Compared to the common vibrating needles powered by electromechanical converters, the EWO has several advantages:

2 Poles - 3000/3600 RPM MVE-Exe Increased SafetyYes! I am interested

Increased Safety MVE-E External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features materials used prevent sparking inside the motor.

Function

Increased Safety MVE-E External Electric Motovibrators can be used as flow aids on hoppers or to improve material discharge, or as drives on machines several purposes such as conveying, screening, sizing, or compacting, in a variety of industries.
When the MVE-E is switched on a sinusoidal centrifugal force is provided by the rotation of the eccentric weights. With only one MVE fitted on a machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.
Specific materials geometry make Increased Safety MVE-E External Electric Motovibrators suitable highly hazardous environments.

Features

2 Poles - 3000/3600 Rpm MVE-Exd Explosion-ProofYes! I am interested

Explosion-Proof MVE-D External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features and tight tolerances avoid that any possible explosion inside the motor will affect the external environment, making the explosion-proof MVE-D suitable for applications in the oil & gas industry where such a feature is mandatory.

Function

Explosion-proof MVE-D External Electric Motovibrators can be used as flow aids on hoppers or silos to improve material discharge, or as drives for conveying, screening, dewatering or fluid recovery on vibrating machines, especially in the oil & gas industry, andoccasionally in the recycling sector.
When the MVE is switched on a sinusoidal centrifugal force is provided by the rotation of the eccentric weights. With only one MVE fitted on a vibrating machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.
Most applications in the oil & gas sector use two MVE Motovibrators per machine to generate linear movement.

Features

8 Poles - 750 RPM MVE-Milling Grain PurifierYes! I am interested

“MVE Milling” External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends, adopting oversized roller bearing to withstand heavy-duty operation.
“MVE Milling” External Electric Motovibrators are available with 8 or 10 pole motors only, due to low r.p.m. required this application.

Function:

“MVE Milling” External Electric Motovibrators are designed application on sieving machines where the different grain components are finely separated classified.
Each is fitted with two “MVE Milling” External Electric Motovibrators mounted in parallel to exploit linear centrifugal force in order to shake the clean at low frequency high amplitude. This has proven to be the best combination to obtain fine accurate separation.

Features:

Mve-d External Electric Moto VibratorYes! I am interested
MVE-D External Electric Motovibrator consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends. Special design features and tight tolerances avoid that any possible explosion inside the motor will affect the external environment, making the explosion-proof MVE-D suitable for applications in the oil & gas industry where such a feature is mandatory.

Function:

Explosion-proof MVE-D External Electric Motovibrators can be used as flow aids on hoppers or silos to improve material discharge, or as drives for conveying, screening, dewatering or fluid recovery on vibrating machines, especially in the oil & gas industry, and occasionally in the recycling sector.
When the MVE is switched on a sinusoidal centrifugal force is provided by the rotation of the eccentric weights. With only one MVE fitted on a vibrating machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating MVE fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application.
Most applications in the oil & gas sector use two MVE Motovibrators per machine to generate linear movement.


Features:
Oil Flanged Vibrator MotorYes! I am interested
 
Welcome to

Oli Vibrators India Private Limited

  • Nature of BusinessManufacturer
  • Total Number of Employees11 to 25 People
  • Year of Establishment2015
  • Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
  • Annual TurnoverRs. 50 - 100 Crore
  • GST No.29AACCO1667Q1ZQ
Established in the year 2015, we, “Oli Vibrators India Private Limited ”, are engaged in manufacturing a comprehensive assortment of Industrial Vibrators, Flow Aids and Concrete Consolidation. Offered array of industrial machines is manufactured in strict accordance with the global quality standards by employing superior-grade raw material and modern machines. Further, the complete range is thoroughly tested on varied quality-testing parameters to assure flawlessness, authenticity and zero-defect. Owing to this, the products offered by us are widely demanded in the construction sector for their attributes such as excellent performance, high operational accuracy, low maintenance, reliability, corrosion, abrasion & distortion resistance and longer functional life.

We have developed a sophisticated infrastructure at Rajkot, India, which is spread over a large area. This infrastructure has been segregated into various independent units, which are managed & controlled by expert professionals. All these units are well-installed with modern machinery, tools and equipment that are frequently lubricated & upgraded to keep abreast of the technological advancements. Besides, to assure safe handling of the machinery, we have appointed a deft team of expert professionals who assure orderly execution. Owing to the sprawling infrastructure, dexterous professionals and quality-approved products, we have been successful in mastering a wide client base all across the nation. Additionally, we conduct regular seminars & workshops for the benefit of the workers as well as the customers.


Read More...
 

Oli Vibrators India Private LimitedOli Vibrators India Private Limited


 

 

Send SMS
Ashish Srivastava  (Marketing Manager)
Oli Vibrators India Private Limited
84/85, 7th Main, Peenya Industrial Area, Bengaluru - 560058, Karnataka, India
Share Us:
Send E-mail